Tag Archives: Cursal Experience – TRSI

SH Somerscales TRSI

SH Somerscales Ltd owned 3 Cursal cross-cutting lines. It’s a family-run company and provides quality timber for construction and renovation projects in South Yorkshire and throughout the UK. After purchasing the first Cursal booster in 2017, they purchased a second one in 2020. For the sawmill department they opted for the TROA optimizer in line with Italian mechanization.
Cursal sells in the UK through J. J. Smith www.jjsmith.co.uk

Testimony
of the owner of SH Somerscales, Mr.  Dan Somerscales regarding the purchase of  TRSI:

 

Mr. Somerscales gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 3 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5

 

 

Natuzzi-Italsofa Romania TRSI

Italsofa Romania is an integral part of the Natuzzi Group, the factory produces sofas and armchairs in leather and fabric. This company started buying from Cursal 20 years ago, when the TRV 500 with electronic stop was widely used for the production of sofas. With satisfaction Italsofa Romania then purchased another 4 TRV 500 FCNs. Over a decade later, Cursal was again chosen by Natuzzi for another plant in Romania in 2020 mode. A cutting line managed by the Cursal Supervisor, with a strapping machine integrated upstream, whose packs pass for cutting and printing in our TRSI pusher . The management takes place by means of a CNC which works with a program for the optimization of semi-finished products.

Testimony of Natuzzi s.p.a., Mr.  Giorgio Blotta regarding the purchase of  TRSI:

Mr. Blotta gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5

Envases Exportables TRSI 7000E

Testimony of the manager of Envases Exportables, Mr.  Felipe Haase regarding the purchase of  TRSI 7000E:

Mr. Haase gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 3 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 4 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

 

 

Stival TRSI 5500E

Our customer Stival produces doors and solid wood components

Testimony of the owner of Stival, Mr. Andrea Stival regarding the purchase of TRSI 5500E:

“Cursal has always proved to be a reliable partner. Simple but well built machines that last over time and at the right price”

Mr. Stival gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 5 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 4 of 5

 

 

Italy 004 TRSI 7000AP

Since 1981, our customer located in Emilia Romagna has been manufacturing industrial packaging. Since 1999, he has been constantly sourcing from Cursal. We are proud to contribute to its production with 6 Cursal plants. As you can see from the pictures, the last system is fully automatic, from loading to unloading. Thanks to the Cursal CNC it is possible to have the perfect synchronization of all phases.

Testimony regarding the purchase of TRSI 7000AP with grips unloaders ACN 3P :

“I have known this company for many years and I can say they are very good at designing tailor-made machinery”

The owner of the company gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 5 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 5 of 5

 

 

Gorza TRSI 7000AP

Our customer Gorza deals with the management of forest cuts and the marketing of timber, in particular poles, sleepers and beams.

Testimony of the owner of Gorza s.r.l.,  Mr. Gianni Gorza regarding the purchase of TRSI 7000AP:

Mr. Gorza gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?    VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 5 of 5

 

 

Azur Pack TRSI 7000OL

For over 30 years, the Azur Pack company in Saint Laurent du Var has been a specialist in packaging for international moving.

Testimony of the Azur Pack owner, Mr. Raphael Steno regarding the purchase of TRSI 7000OL:

Mr. Steno gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?    VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?    VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 5 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 5 of 5

 

 

Gyetvai Pack TRSI 8000

Since 1999 our Hungarian customer GYETVAI PACK KFT offers complete packaging solutions for electronics manufacturers, machinery, automotive industry and suppliers across the country

Testimony of the Gyetvai Pack Kft owner, Mr. Gyetvai Zoltan  regarding the purchase of  TRSI 8000:

Mr. Gyetvai gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?    VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?    VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 5 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 5 of 5

 

 

Embalajes Aralar TRSI 7000AP

Testimony of the Administrator of Embalajes Aralar S.L / Embalajes Bretonf, Mr. Miguel Angel Aldasoro regarding the purchase of  TRSI 7000AP:

Mr. Miguel Angel Aldasoro gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?   VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?   VOTE: 5 of 5

 

 

Fabripal TRSI 8000AP

Testimony of the Fabripal S.L. owner, Mr. Miguel Angel Catala regarding the purchase of  TRSI 8000AP:

Mr. Catala gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5

 

 

Italy 003 TRSI 7000AP

Our customer from Bologna has been manufacturing packaging for shipments since 1897. The first line purchased by Cursal dates back to 2004 and was a pusher. Recently purchased the second.
Another customer faithful to the quality of Cursal products.

Testimony regarding the purchase of  TRSI 7000AP:

The worker gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 2 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 3 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

 

 

Spain 001 TRSI 7000OL

Our Spanish customer designed his first motorhome in 1978 and started mass production in 1986. 350 employees and 130,000 m² of facilities, equipped with state-of-the-art machinery including the Cursal pusher. The customer uses the Cursal software to optimize lengths, ideal for optimizing, with minimum deviation in length, the cutting of single boards or in bundle.

Testimony regarding the purchase of  TRSI 7000OL:

The worker gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 3 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 3 of 5
5) What do you think about the safety level of our machines?      VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 3 of 5