Tag Archives: saw-mill

TVM Ø700

For more information please fill in the form at the following link or chat with us 

NEW GENERATION OF CROSS CUT SAWS TOTALLY  PROJECTED IN 3D: TVM Ø 700

TVM 600 – TVM 700 are the biggest cross cut saws produced by CURSAL  with vertical alternative movement of the blade (the fastest). So, if the cutting sections match, there are no doubts, it’s the machine that you are looking for.
The quality – price ratio, the simply use and the maintenance almost inexistent, make this series of cutting, a highly competitive product, accessories included.
Made with modular design, for an assembly related to the customer, it can satisfy all your needs. The lines, are completed, and ready to start.

TVM 700 it’s usually combined:
• With electro-pneumatic beats (for packs of boards with a low range of repetitive sizes)
• Or with a numerical control stopper (where is required a big size flexibility)

During the unload, the semi-machined pieces are ejected on a transfer, on a floor drain or on free-rollers.

For all the details, check the ACCESSORIES section.

Strength points
 Safety for the operator
 Ergonomics of production phases
– Wear compensation of the materials without replacement
– Arranged to customized CURSAL accessories
– Streamline quality costs amount

☑☑☑☐☐ Waste recovery on the sides for multi-rip saws
☑☑☑☑☐ Semi-machined pieces for wood furniture
☑☑☑☑☑ Packaging field
☑☑☑☐☐ Doors, frames, skirting and construction
☑☑☑☑☐ General sawmill works

STANDARD TECHNICAL DATA

Blade motorWorking height planAir consumptionAverage noise level on operator
(KW)mm.nl/min.DBA
TVM
Ø 700
9,2/11900150 ÷ 250< 82,5

AVAILABLE CUTTING SECTIONS

cutting section TVM 700

Some Solutions

LAYOUT

The manufacturer reserves the right to make changes without prior notice at any time

TRV 2000 Ø700R

For more information please fill in the form at the following link or chat with us 

HIGH SPEED OPTIMIZATION IN A SAWMILL?
WITH TRV 2000 NOW YOU CAN

TRV 2000, it’s a trimmed/no trimmed boards optimizer, that includes – high precision – big cutting section – working speed.

Available in optimizing version (it uses the Cursal’s tested software used by the other set of optimizing saws)  and it is the ideal ally to speed up the work cycle in sawmills.

It optimizes the external side of trunks from the defects – that with traditional machines should not be recovered – in line with the mobile multi-blade for the completion of the cycle.
It advances with a speed of 150 ml/min (auto-limited) with Brushless engine, which allows it to drain the whole product, in line with the fastest log saws, preventing accumulation and interruptions in the sawmill.

The accuracy it’s so high that it’s not even required the trimming after the multi blade.
The validity of the software, it can be seen in the usage for the optimization of medium noble wood sections.

Machine body
Feeding direction from right to left by means of 8 toothed rollers.  Pneumatic pressure wheels specific for unhedged boards. The in-line optimization, in the engine block of the cross cut saw, allows to process curved and twisted boards.

Taste the performance of this line watching the video on the right.

☑☑☑☐☐ Semi-machined pieces for wood furniture
☑☑☑☑☐ Packaging field
☑☑☑☑☑ Boards recovery on the sides of the log
☑☑☑☐☐ Fixtures, construction and flooring
☑☑☑☐☐ Laminated panels, boards, structures

STANDARD TECHNICAL DATA

Blade motorWorking height planAir consumptionMaximum speed
(KW)mm.nl/min.mt/min
TRV 2000
Ø 700R
9,2/11950
±20
35090 ÷ 150
self-limited

AVAILABLE CUTTING SECTIONS

cutting sections - TRV 2000 e

SOME SOLUTIONS

LAYOUT

The manufacturer reserves the right to make changes without prior notice at any time

TOM Ø500-900 – Ø500-1100

For more information please fill in the form at the following link or chat with us 

NEW GENERATION OF CROSS CUT SAWS TOTALLY PROJECTED IN 3D: TOM Ø 500

PURPOSE: INCREASE the production, REDUCING times and costs in the SAW MILL SECTOR.
TOM 500 – generally in line with log saws and multi-rip saw – it’s THE CUTTING SOLUTION with the biggest sizes section produced by CURSAL.

SUPER saw mill machine for physically hard jobs, it’s been adapted to work for a long time in extreme conditions and extreme locations. The blade movements, with both vertical and horizontal translation, are on recycled ball bearings with controlled stokes. This is made, to reduce the work cycle with the cuts of wet, dry, and bandy boards.

MULTI ACCESSORIED: TOM is usually feeded by transfer systems, table turner, lifting arms and introducers, to fit in various cycles for the first working process. During the unload it’s combined with electro-pneumatic beats (for packs of boards with a low range of repetitive sizes) or a numerical control stopper (where is required big flexibility sizes) manageable by the keypad at operator’s height.

On discharge, the semi-finished pieces, are ejected on a transfer, exhaust floors or free rollers.

For details, check the ACCESSORIES section.

Strengths:
Safety for the operator
Ergonomics of production phases
Wear compensation of the materials without replacement
– Arranged to customized CURSAL accessories
– Streamline quality costs amount.

☑☑☑☑☑ Exotic wood flooring
☑☑☑☑☐ Semi-machined pieces for wood furniture
☑☑☑☑☑ Packaging field
☑☑☑☑☑ General saw-mill

STANDARD TECHNICAL DATA

Blade motorWorking height planAir consumptionAverage noise level on operator
(KW)mm.nl/min.DBA
TOM
Ø 500-900
9,2 / 11900 300 / 500< 83
TOM
Ø 500-1100
9,2 / 11900300 / 500< 83

AVAILABLE CUTTING SECTIONS

Some Solutions

Layout

The manufacturer reserves the right to make changes without prior notice at any time

TROA Ø550-800

For more information please fill in the form at the following link or chat with us 

TROA 550 uses the same mechanics of the TROE and is a massive sawmill cross-cut saw.

FOR PACKAGING SEMIFINISHED
• The 160-800 version is used on the in-line packaging field with log saws and multi-rip saw, wherein very high crosscutting speeds are required (15/20 cuts per minute for thickness size 150 mm). In these cases 20HP saw blade motors and blade displacements with variable speed motors are used.
It is planned to work with frozen boards. In order to avoid positioning errors – due to skidding – a NC stop is used, which is controlled in parallel by NC cross-cut saw, without adding further time.

HARD WOOD SEMI-MACHINED

☑☑☑☑☑ Semi-machined pieces for furniture
☑☑☑☐☐ Saw-mill for packaging
☑☑☑☑☐ General saw-mill

STANDARD TECHNICAL DATA

Blade motorWorking height planAir consumptionMaximum speed
(KW)mm.nl/min.mt/min
TROA
Ø 550-800
11 / 15950
±20
200 / 400110 ÷ 120

AVAILABLE CUTTING SECTIONS

cutting sections - TROA 550-800

Some Solutions

Layout

The manufacturer reserves the right to make changes without prior notice at any time

TROE Ø550-800

For more information please fill in the form at the following link or chat with us 

It does everything alone. Cursal has designed this cross cutting line aiming at the automation of all handling operations for planks, including sticks separators collection.

The cross-cut saw TROE was especially designed for crosscutting non-trimmed planks that are twisted and separated by cracks.
THE LOWER HAUL-OFF DOES NOT HAVE INTERRUPTIONS AND HAS A SELF-LIMITED SPEED AT 120 LM/MIN.
(Haul-off characteristics: 5 rollers in toothed and nitride sectors; NC 26 pressure wheels, independently on the upper side and in part hauled, with surfaces set for guiding or hauling.)
– Planks transfer is optimized by reducing the path to the minimum.
– Defects reading is assisted by a laser handled with NC.
Over 5 planks (hard wood and high-grade timber) can be cut off per minute.

The generous cutting sections that TROE offers (reaches one meter in width), hence enabling a working range that is basically unlimited and unimaginable working qualities for any other crosscutting line. Available with Cursal optimization, it can take advantage of most accessories on this catalogue.

☑☑☑☑☐ Semi-machined pieces for wood furniture
☑☑☑☑☐ Parquets, flooring
☑☑☑☑☐ General saw-mill works

STANDARD TECHNICAL DATA

Blade motorWorking height planAir consumptionMaximum speed
(KW)mm.nl/min.mt/min
TROE
Ø 550-800
11 / 15950
±20
200 / 400110 ÷ 120

AVAILABLE CUTTING SECTIONS

cutting sections - TROE 550-800

Some Solutions

Layout

The manufacturer reserves the right to make changes without prior notice at any time

TRV 2000 Ø700

For more information please fill in the form at the following link or chat with us 

HIGH SPEED OPTIMIZATION IN A SAWMILL?
WITH TRV 2000 NOW YOU CAN

TRV 2000, it’s a trimmed/no trimmed boards optimizer, that includes – high precision – big cutting section – working speed.

Available in optimizing version (it uses the Cursal’s tested software used by the other set of optimizing saws)  and it is the ideal ally to speed up the work cycle in sawmills.

It optimizes the external side of trunks from the defects – that with traditional machines should not be recovered – in line with the mobile multi-blade for the completion of the cycle.
It advances with a speed of 150 ml/min (auto-limited) with Brushless engine, which allows it to drain the whole product, in line with the fastest log saws, preventing accumulation and interruptions in the sawmill.

The accuracy it’s so high that it’s not even required the trimming after the multi blade.
The validity of the software, it can be seen in the usage for the optimization of medium noble wood sections.

Machine body
Tested traction belt-system without parts that can embed cut pieces.  Pneumatic pressure wheels specific for unhedged boards. The in-line optimization, in the engine block of the cross cut saw, allows to process curved and twisted boards.

Taste the performance of this line watching the video on the right.

☑☑☑☐☐ Semi-machined pieces for wood furniture
☑☑☑☑☐ Packaging field
☑☑☑☑☑ Boards recovery on the sides of the log
☑☑☑☐☐ Fixtures, construction and flooring
☑☑☑☐☐ Laminated panels, boards, structures

Standard technical data

Blade motorWorking height planAir consumptionMaximum speed
(KW)mm.nl/min.mt/min
TRV 2000
Ø 700
9,2/11950
±20
25090 ÷ 150
self-limited

Available cutting sections

cutting sections - TRV 2000 e

Some Solutions

Layout

The manufacturer reserves the right to make changes without prior notice at any time