All posts by Cursal S.r.l.

Croatia 003 TRO 400

The company of our Croatian customer is located in the Podravina region and was founded in 1971. The production covers glued solid panels (annual production approximately 5000 m3), edged boards, profiled strips and briquettes. Since 2010, they have chosen 3 Cursal lines: 1 TRV 1200L series woodcutter, a TRV 2200E optimizer and a panel saw.

Testimony of the owner regarding the purchase of  TRO 400:

The owner gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

 

 

Croatia 002 TRV 1200 550L

The company of our Croatian customer is located in the Podravina region and was founded in 1971. The production covers glued solid panels (annual production approximately 5000 m3), edged boards, profiled strips and briquettes. Since 2010, they have chosen 3 Cursal lines: 1 TRV 1200L series woodcutter, a TRV 2200E optimizer and a panel saw.

Testimony of the owner regarding the purchase of  TRV 1200 550L:

The owner gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

Croatia 001 TRV 2200E

The company of our Croatian customer is located in the Podravina region and was founded in 1971. The production covers glued solid panels (annual production approximately 5000 m3), edged boards, profiled strips and briquettes. Since 2010, they have chosen 3 Cursal lines: 1 TRV 1200L series woodcutter, a TRV 2200E optimizer and a panel saw.

Testimony of the owner regarding the purchase of  TRV 2200E:

The owner gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 3 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

 

 

Asson TROA 550

The green cross-cut saw in the photos below, dates back to 1996, when our customer Asson placed the first TRO 500 in the Trentino plant, with electronic switch in his plant. Decades have passed and our greatest satisfaction is to see that Asson has once again trusted the Cursal brand, this time, in step with the times, introducing in 2018 a sawmill war machine: the sturdy TROA with roller traction.
Curiosity: the green machine is disassembled because in 2018, after 22 years of service, it was sold to another timber company, and is still fully functional!

Testimony of the owner of Asson, Mr.  Asson Stefano regarding the purchase of  TROA 550:

Mr. Asson gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5

Italy 005 TROA 550

Our Trentino customer deals with the production and marketing of wooden packaging and pallets. He chose the portentous TROA 550, an indispensable war machine in sawmills with high production.

Testimony of the ownerregarding the purchase of  TROA 550:

The owner gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 3 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5cursal

 

Natuzzi-Italsofa Romania TRSI

Italsofa Romania is an integral part of the Natuzzi Group, the factory produces sofas and armchairs in leather and fabric. This company started buying from Cursal 20 years ago, when the TRV 500 with electronic stop was widely used for the production of sofas. With satisfaction Italsofa Romania then purchased another 4 TRV 500 FCNs. Over a decade later, Cursal was again chosen by Natuzzi for another plant in Romania in 2020 mode. A cutting line managed by the Cursal Supervisor, with a strapping machine integrated upstream, whose packs pass for cutting and printing in our TRSI pusher . The management takes place by means of a CNC which works with a program for the optimization of semi-finished products.

Testimony of Natuzzi s.p.a., Mr.  Giorgio Blotta regarding the purchase of  TRSI:

Mr. Blotta gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 4 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5

CURSAL PUSH SYSTEM PLANT

We are present in Croatia mainly in sawmills. Our Croatian client is specialized in production of furniture and saw milled wood and started its business in 1950.
He currently has two Cursal cross-cut saws.
The line is composed of a push system cross-cut saw with buffer in discharge and introduction device to the Superset Scm group.
Cursal has realized all the automation in loading / unloading.
#cursalsrl #cursallovescroatia #cursalcrosscutsaws #cursalforsawmill #cursalautomations #cursaleuropeservice #cursaloptimization

Tosco imballaggi TRO/TOM 500

Tosco Imballaggi, founded in 1948 by Giovanni Minucci and his brothers, is a historic Arezzo joinery specialized in the tailor-made production of packaging, cases, containers and wooden pallets. At the time, every tool of the joinery was of manual type, from then on, the Tosco Imballaggi has built an innovation without equal, realizing a shed of 2000 Mq in which it is present a Cursal cut-off machine with automation for large sections TRO/TOM 500. Upstream, the TRO/TOM 500 receives the boards from the sawn  timber. Downstream it unloads cut boules but it measures thanks to an automatic unloader with suction cups at 90% on 3 stations.

Testimony of the owner of Tosco Imballaggi, Mr.  Massimo Minucci regarding the purchase of  TRO/TOM 500:

Mr. Minucci gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 5 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 5 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 5 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 5 of 5
5) What do you think about the safety level of our machines?      VOTE: 5 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 5 of 5

 

 

Tecnowall TOM 500

Leader in the production of sandwich panels, TecnoWall asked us just one machine to cut the walls of motorhomes. After sending the material to Cursal and having made various cutting tests, we have also become suppliers for the cutting of this material, of which we attach photos. Since 2001 TecnoWall in Tuscany has established itself among the excellences in the production of high-tech sandwich panels of medium and large size and customized.

Testimony of the worker of TecnoWall, Mr.  Alessandro Dani regarding the purchase of  TOM 500:

Mr. Dani gave us the following scores:
1) Have you noticed an advantage of the production with the cross cutting saw purchased?     VOTE: 4 of 5
2) Would you choose a Cursal cross cutting saw again?     VOTE: 4 of 5
3) In the case of direct installation, did the Cursal technician live up to your expectations?     VOTE: 4 of 5
4) How do you rate the cost/benefit ratio of a Cursal cross cutting saw?     VOTE: 3 of 5
5) What do you think about the safety level of our machines?      VOTE: 4 of 5
6) What experience have you had with the Cursal staff during sales, after-sales service and spare parts?  VOTE: 4 of 5