{"id":19862,"date":"2016-02-24T17:09:28","date_gmt":"2016-02-24T16:09:28","guid":{"rendered":"https:\/\/www.cursal.com\/?p=19862"},"modified":"2021-05-17T09:38:09","modified_gmt":"2021-05-17T07:38:09","slug":"trv-2700eb-cross-scan-4-1","status":"publish","type":"post","link":"https:\/\/www.cursal.com\/?p=19862&lang=en","title":{"rendered":"TRV 2700EB + CROSS-SCAN 4.1. Advanced Wood Scanning Solutions"},"content":{"rendered":"

For more information please fill in the form at the following link\u00a0<\/a>or chat with us\u00a0\"\"<\/a><\/p>\n

OPTICAL SCANNER FOR QUALITY AND DEFECTS DETECTION \u2013 CONTINUOUS PRODUCTION VERY HIGH-SPEED<\/strong><\/p>\n

Technological, intelligent and productive<\/strong>, Cross-Scan 4.1 is the best way to exponentially<\/strong> increase production rhythms, minimizing labour costs and accurately detecting<\/strong> characteristics and defects of wood.<\/p>\n

The automatic scanner exploits the potential of Cursal high-speed optimizing cross-cut saw TRV 2700EB<\/strong> 500. The Cursal cross-cut saws are fully equipped to put the scanner in line with other accessories, in order to complete the cycle.<\/p>\n

The scanner processes the board by detecting all the defects<\/strong> on the 4 faces, differentiating them according to the parameters set. Once scanning is complete, it calculates the best possible combination<\/strong>, with an optimization process, considering the inserted cutting list<\/strong>, and immediately transmits the data to the CNC of the cross-cut saw.<\/p>\n

The in-feed and out-feed of the boards consists in a system of low-wear CNC belts<\/strong>: pneumatic pressure wheels, aligning wheels at guide, pressure heads with idle wheels, control of the feeding sequence using consents.<\/p>\n

>\u00a0<\/strong>DETECTABLE DEFECTS
\n<\/strong>Knots-Cracks-Pitch pockets-Discolorations- Heartwood-Bark- Wanes-Dimesional defects-Wormholes.<\/p>\n

>\u00a0<\/strong>PARAMETERS CUSTOMIZATION
\n<\/strong>The parameterization for the detection of the various types of defect can be corrected, improved or perfected<\/strong> at any time, with a simple and rapid operation on the software parameters. Possibility of complete<\/strong> customization<\/strong> of the rules, choosing to give priority considering: Lengths-Recovers for finger-joint- Quantity-Value-Quality.
\nIt is also possible to establish different rules for detecting<\/strong> defects on each of the four sides of the board, (differentiating them also on the width on each side).<\/p>\n

> PRODUCTION STATISTICS
\n<\/strong>Through an easy and comfortable statistics module<\/strong>, the operator can keep the production monitored<\/strong>, with the possibility of exporting data in Excel format.<\/strong><\/p>\n

Some Solutions<\/h2>\n

[slideshow_deploy id=’23735′]<\/p>\n

LAYOUT<\/h2>\n

[slideshow_deploy id=’19688′]<\/p>\n

The manufacturer reserves the right to make changes without prior notice at any time<\/em><\/p>\n

\n